DAD 1000DS

The Security

A semiconductor key works principally in the same way as placing a computer chip on your beloved pet, each chip is individual and when scanned holds unique information. This makes identifying the user (or dog) exclusive to that chipped key.

Identification is absolute.

Only semiconductor key holders can register, process and delete users.

Semiconductor Key and Password Templates

You can register 20 semiconductor keys and 1 password with 3-12 digits.

High Level of Security

It is impossible to copy a semiconductor key with individually programmed code.

Rejection of all-purpose keys

This door lock does not have a keyhole and therefore there is no lock to pick or skeleton keys to use.

Individual Deletion of

Lost Semiconductor Key

Should you lose a registered semiconductor key, you can delete that ID thereby preventing it being used by a stranger.

System Suspension Function

The door lock systems will not operate for 30 seconds if identification is refused 5 times.

Auto Locking Function

When this function is set, the door lock will lock automatically within 7 seconds of opening and closing the door. If the door fails to close an alarm will sound. When this function is not set the door is locked by manual operation. (See also “One Touch Lock and Open”)

Dual Locking Function

You can use this function if you need a restricted level of security.

Tracking Function

This function enables the last 20 users of the door to be displayed by using their individual id numbers.

Warning Function against Forced Trespass

Any forceful attempt to disassemble the door lock is detected and alarmed.

The Convenience

User Identification Function

It’s easy to manage registration and deletion of semiconductor keys & passwords using individual id numbers.

Voice Information Function

An automated voice indicates the state and function of the system, guiding the user as they operate the door lock.

Voice Volume Control

The user is able to control the volume of the voice to suit the environment in which the door lock is located.

One Touch Lock and Open

From the inside, the door can be locked or opened by the touch of a button and, when leaving the premises, it is locked by pressing a single button on the outside. (See also “Auto Locking Function”)

System Reset Function

This function enables the user to reboot the system should anything unusual occur. This is similar to rebooting a computer and no information is lost by using this function.

Built-in Light Function

Built-in lights allow easy use of the door lock at day or night.

The Lock

The door lock is easy to install on an existing door and easy to remove if a change of premises occurs.

Slide Cover

The cover protects the reader and ensures that it remains water-resistant.

Protection of Circuitry

By using water-resistant coated and insulated parts, the circuitry is protected from static electricity and moisture caused by temperature change. This enables the lock to be used, in many cases, externally as well as internally.

Battery Change Notification Function

The system notifies the user to change the battery via a voice instruction and a display on the status window. If these warnings are ignored, the door lock may cease to operate and emergency power will be needed to gain access. (See also “Emergency Power Supply”)

Power Save

If the lock is unused for 10 seconds the power will automatically turn off, saving power to the battery.

Self-Checking Function

The door lock can evaluate its own condition and display its status on the display window or by sound. Errors are indicated on the display as follows; E1, E2, E3 etc.

The Installation

The lock can easily be installed by an individual, or your local handyman.

The lock can, in many cases, conveniently fit into existing barrel hole of your existing door lock.

Emergency Power Supply

If the batteries are not renewed and are depleted, it is possible to enter using the power of a DC 9V battery positioned on the terminals located on the outside body of the door lock.