DAD 2000F

The Security

Your fingerprint cannot be duplicated.

The fingerprint sensor will only detect live fingerprint and will not except copies or impressions that may be left on the sensor. This is due to the sensor reading the fingerprint from the inner skin rather then just a picture image of the outer fingerprint itself. Only registered users are admitted.

Identification is absolute.

Only registered users can register, process and delete users.

Fingerprint and Password Templates

You can register 50 fingerprints and 5 passwords, entry can be gained by using a 3-12 digit password, if your fingerprint is injured or the sensor was to be damaged.

System Suspension Function

The door lock systems will not operate for 30 seconds if identification is refused 5 times.

Auto Locking Function

When this function is set, the door lock will lock automatically within 7 seconds of opening and closing the door. If the door fails to close an alarm will sound. When this function is not set the door is locked by manual operation. (See also “One Touch Lock and Open”)

Dual Locking Function

You can use this function if you need a restricted level of security.

Tracking Function

This function enables the last 20 users of the door to be displayed by using their individual id numbers.

Warning Function against Forced Trespass

Any forceful attempt to disassemble the door lock is detected and alarmed.

The Convenience

There are no keys (or cards) to forget to carry, lose or be “borrowed”. Your fingerprint is all that is needed to open a door.

If your registered fingerprint is injured or the sensor is damaged, you can unlock the door using a 3-12 digit password.

User Identification Function

It’s easy to manage registration and deletion of fingerprints & passwords by each registered user having an individual id number.

Voice Information Function

An automated voice indicates the state and function of the system, guiding the user as they operate the door lock.

Voice Volume Control

The user is able to control the volume of the voice to suit the environment in which the door lock is located.

One Touch Lock and Open

From the inside, the door can be locked or opened by the touch of a button and, when leaving the premises, it is locked by pressing a single button on the outside. (See also “Auto Locking Function”)

System Reset Function

This function enables the user to reboot the system should anything unusual occur. This is similar to rebooting a computer and no information is lost by using this function.

Built-in Light Function

Built-in lights allow easy use of the door lock at day or night.

The Lock

As a self-contained fingerprint identification unit and door lock, it is easy to install on an existing door and easy to remove if a change of premises occurs.

Slide Cover

The cover protects the sensor and ensures that the sensor remains water-resistant.

Protection of Circuitry

By using water-resistant coated and insulated parts, the circuitry is protected from static electricity and moisture caused by temperature change. This enables the lock to be used, in many cases, externally as well as internally.

Battery Change Notification Function

The system notifies the user to change the battery via a voice instruction and a display on the status window. If these warnings are ignored, the door lock may cease to operate with the fingerprint scanner and will then only except a password entry. (See also “Emergency Power Supply”)

Power Save

If the lock is unused for 10 seconds the power will automatically turn off, saving power to the battery.

Self-Checking Function

The door lock can evaluate its own condition and display its status on the display window or by sound. Errors are indicated on the display as follows; E1, E2, E3 etc.

The Installation

The lock can easily be installed by an individual, or your local handyman.

The lock can, in many cases, conveniently fit into existing barrel hole of your existing door lock.

Emergency Power Supply

If the batteries are not renewed and are depleted, it is possible to enter using the power of a DC 9V battery positioned on the terminals located on the outside body of the door lock.

Master Function Option

This product is also available with a master management system, where by a master password can control all registration and deletion.